Capillary optics mostly consist of glass capillaries. The X-rays are reflected in the capillaries once or many times redirecting the light to the focal plane. Table 1 gives an overview over typical parameters of capillary optics.

 

Parameter Symbol
Typical values
Comment
    mono capillary
poly capillary  
Beam diameter

du or
dx,u
, dy,u

0.01-20 mm 0.1-20 mm  
Focal spot diameter dcapillary 0.25-1000 µm 6-1000 µm  
Entrance diameter D1 0.01-20 mm 0.1-20 mm  
Exit diameter D2 0.01-0.2 mm 0.1-20 mm  
Radiant intensity increasing KΘ 5-50 10-100 KΘ=τ(ΔΘE/ΔΘA)2
Capillary length Lcapillary 10-1000 mm 10-1000 mm  
Entrance working distance rcap,1 ∞-0.1 mm ∞-3 mm  
Exit working distance rcap,2 0.1-∞ mm 3-∞ mm  
Entrance angle acceptance ΔΘE 0.01-0.25 rad 0.01-0.25 rad ΔΘE=2 arctan(D1/(2r1))
Exit angle divergence ΔΘA 0.01-0.25 rad 0.01-0.25 rad ΔΘA=2 arctan(D2/(2r2))
Divergence of a quasi-parallel beam (for poly half capillaries) ΔΘA 0.0005-0.001 rad 0.001-0.005 rad  
Intensity gain K 5-1000 500-20000  
Spectral transmission τ(λ) 0.1-0.9 0.05-0.6  

 

Table 1: Typical parameters of capillary optics [VDI 2009b]

 

Poly capillary optics

In poly capillary optics (also called Kumakhov-lenses) X-rays are guided in a bundle of narrow glass capillaries by total external reflection (TER) (fig. 1) [Kum 1992]. The capillaries in the bundle are bend in a way that one side of each capillary is pointing to the X-ray source and the other side is pointing to the focus area. Poly capillary optics do not image the source point to a focus point in the sense of optical imaging: light entering the capillaries with a certain divergence angle is guided to the end of the capillary, where it leaves the capillary with an unchanged divergence angle. Consequently the light spreads out on its way from the end of a capillary to the focus area. So these optics are illumination optics.

Concentrating X-rays using a capillary optics

Fig. 1: Concentrating X-rays using a poly capillary optics, photograph of a poly capillary on mouseover

 

Mono capillary optics

In mono capillary optics X-rays are guided in a single glass capillary by total external reflection (fig. 2). The inner side of the mono capillary has got a rotational elliptic or rotational parabolic geometry. The source is positioned in one of the two focal points of the ellipse respectively in the focus point of the parabola. The light is redirected to the second focal point in case of the elliptical geometry respectively is collimated in case of the parabolic geometry. Focusing an incoming beam parallel to the optical axis is also possible. In both cases the light undergoes a single reflection at the inner side of the mono capillary.

X-ray mono capillary

Fig. 2:  Mono capillary, lost rays marked red on mouse-over

 

Tapered capillary optics

Tapered capillary optics consist of a slightly conical tube with very smooth inner surface.The maximum cone angle is limited by the maximum angle of total external reflection for the material and photon energy used. The incoming light is reflected one or more times at the inner surface of the tube, mostly by total external reflection in a glass capillary, but other materials would be fine as well. There is no precise focus point, more like a line of increased intensity along the optical axis (fig. 3; the tapering is largely overdrawn). These optics are simple, but have the disadvantage of providing very small working distances and do not have any imaging qualities.

tapered capillary optics with simulated intensity distribution

Fig. 3:  Tapered capillary with simulated intensity distribution

 

[Kum 1992] M. A. Kumakhov and  V. A. Sharov, A neutron lens, Nature vol. 357, pp. 390-391, DOI: 10.1038/357390a0, 1992
[VDI 2009b] VDI/VDE 5575 Blatt 3: 2009-02 Röntgenkapillaren (X-ray optical systems; Capillary X-ray optics), Berlin, Beuth Verlag, 2009

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.